Tips for Maintaining Your Winter Indoor Air Quality

The colder winter months of the year can be hard on an HVAC system. Cold dry air and the use of heating sources can hinder your indoor air quality. Fortunately, there are three ways you can help to maintain good air quality this winter.

1. Get a Humidifier

One issue that many people have in the winter is that their skin gets very dry due to the dry air. This problem is often made even worse when using a furnace during the coldest parts of the year. Fortunately, you can help to prevent dry skin by getting a humidifier and installing it in your home. This will help to ensure that the air in your home has a normal level of moisture, which you will notice immediately.

2. Clean Out the Filters and Ducts

Another reason why air quality can be harmed in the winter is because the furnace is suddenly blowing in a lot of dust, debris, and allergens into the air. If your furnace has not been used in a while, there could be a large buildup of allergens in the unit and the ducts. Thankfully, the crew at Gilmore Heating, Air and Plumbing⁣ in Placerville can make sure your ducts are fully cleaned out prior to the start of winter.

3. Install an Air Purifier

Having an air purifier installed in your home can also go a long way. An air purifier will help to remove harmful pollutants from the air, which can carry bacteria and even viruses. This can help to keep you and your family healthy during the cold winter months.

Here at Gilmore Heating, Air and Plumbing⁣, we can address all your indoor air quality concerns. We’ll provide you with a full home evaluation and give advice on how you can maintain healthy air this summer. Give us a call today for more information or to make an appointment. We also handle heating and cooling repairs and installations.

3 Ways to Clean Your Heating System

Cleanliness is essential to keeping your furnace running in top condition all winter. At Gilmore Heating Air and Plumbing⁣, we recommend the following three tips to help clean your heating system

1. Change Your Air Filter

One of the simplest DIY maintenance practices you can do to maximize your air quality and your HVAC system’s efficiency is to clean the air filter. Locate your furnace’s access panel, located outside the furnace. Next, simply open the door inside and remove the filter. If the filter appears to be dirty, you will need to clean or replace it. Clean non-disposable filters with a non-toxic cleaner and water.

2. Clean Your Furnace’s Interior

Thoroughly clean the inside of your furnace by first unplugging its power cord. Next, dampen a cloth or towel with water and apply a non-toxic cleaner. Using the towel, clean the inside of the furnace, removing the fan from its location. Follow up with a vacuum then return the fan. Secure all wires and connectors, connect the power cord, and close the interior door and front panel of the furnace. If you are unsure of how to clean your furnace, contact our licensed HVAC professionals. In addition to cleanings, we do repairs, replacements, and annual routine checkups to keep your HVAC system running optimally.

3. Clean and Vacuum the Heat Exchanger Block

Start by turning off the gas, if your furnace is a gas unit, and disconnect the power cord. Next, use a toothbrush to scrub the buildup from each chamber. Using a vacuum with a narrow attachment, vacuum each chamber.

Furnace Cleaning in Placerville

When in doubt, call in the professionals to clean your furnace. From our founding in 1979, our business has remained committed to providing heating and cooling services. We offer a lifetime guarantee on the quality of our workmanship. Let us know if you require additional service due to an issue arising from our installation service. We’ll return and correct the problem free of charge. Call Gilmore Heating Air and Plumbing⁣ today to receive a consultation from one of our knowledgeable technicians.

How To Optimize Your Energy Efficiency This Winter

Saving energy this winter doesn’t have to be time-consuming or expensive. In fact, there are several low-cost ways to optimize energy efficiency during the cold winter months. Here are a few:

1. Cover Your Home’s Windows

Drafty windows can reduce your home’s energy efficiency. If new windows aren’t in your budget this year, don’t worry. You can seal drafty windows by taping heavy plastic over them.

2. Reduce the Temperature on Your Hot Water Heater

Adjust your hot water heater to a warmer setting. A comfortable setting is 120 degrees. By taking this action, you can optimize your energy efficiency and prevent hot-water burns.

3. Use LED Holiday Lights

Decorating your home for the holidays can raise your electricity bills. When you decorate your home with lights, be sure to invest in LED lights. For the most savings, be sure to buy lights that are certified by ENERGY STAR.

4. Use Your Wood-Burning Fireplace

A wood-burning fireplace can provide heat for a fraction of the cost of raising your thermostat. Be sure to open the fireplace dampers and close the doors in the room.

5. Adjust Your Thermostat

It feels good to come home to a warm environment, but keeping your home warm all day can result in an expensive utility bill. When you’re not at home, reduce the temperature on your thermostat.

6. Seal Your Fireplace

Like windows, fireplaces can get drafty. This is especially true if your fireplace isn’t sealed properly. Inspect your fireplace for drafts. Seal or caulk any areas that cause heat to escape from your home.

7. Clean and Maintain Your Heating System

A dirty heating system can adversely affect your home’s energy efficiency. Optimize your heating system by replacing your filters as needed. To maintain your heating system, schedule an appointment with Gilmore Heating, Air, and Plumbing⁣.

Our technicians at Gilmore Heating, Air, and Plumbing⁣ can help you optimize your energy efficiency. Services include professional furnace repair and furnace tune-ups. Call us to schedule an appointment for one of our services in the Placerville area.