Common Pet Damage to HVAC Systems



Are your pets causing damage to your HVAC system? 

The American Veterinary Medical Association estimates that in 2017, 68% of all homes in the U.S. had pets. While the pets people keep may vary from one home to another, dogs and cats are by far the most common. Many Sacramento homeowners are surprised by the common pet damage to HVAC systems. Fortunately, there are ways to prevent further damage. If your household has a pet or two, read on and learn some of the adjustments that you need to make in order to stop the pet damage to your HVAC systems.

Changing the Air Filters Regularly

If you have furry pets, it is imperative that you change the filter regularly since pet fur and dander can quickly clog the filter. This happens when that fur and dander are sucked into the vents of the HVAC system, and they end up in the air filter and ductwork. Changing the filters as recommended will ensure that your HVAC system is running more effectively. Here’s how to install an air filter in a furnace

Changing your air filter frequently is an important step to maintaining your HVAC system. If the airflow is being blocked, your HVAC system will have to work even harder than usual. To ensure that everything is running properly, contact the best HVAC company in Sacramento for help. This expert will assess the conditions present in your home and recommend the most appropriate intervals at which you need to change the air filter.

When you follow that recommended schedule, the indoor air quality, and the performance of the air conditioning system will improve greatly. 

Protecting the Outdoor Unit

If you have a dog, the chances are high that it urinates on the outdoor AC unit as a way of marking its territory. Folsom AC service technicians explain that dog urine is very corrosive and will damage the AC unit. Your dog may also claw at the outdoor unit, and this can eventually cause serious damage to the unit in addition to putting your dog at risk of being electrocuted.

HVAC experts recommend building a fence or barrier around the outdoor AC unit so that your pets (especially dogs) cannot access it. If you aren’t sure about the barrier that will do a good job, talk to our professionals from Gilmore Heating and Air for advice.

Secure Electrical Cords

As a pet owner, you probably know how common it is for pets to chew on anything in sight, including cords and wires. This poses a grave risk to your pets and home. 

HVAC repair experts in Sacramento recommend that all wires and cords be enclosed in conduits so that those wires are safe from the action of pets. 

Clean and Groom Your Pets

Another helpful tip that can help your air conditioning system is becoming more vigilant about cleaning and grooming your pets. You’re probably wondering how this is beneficial to your home’s HVAC system?

When pets are groomed, preferably by a professional, there will be less loose fur and dander to be sucked into the HVAC system. Fox Valley plumber at Tureks Plumbing also adds that loose fur can also damage your plumbing system and clog your drains. Therefore, your ducts and filters will be much cleaner. For this reason, Sacramento HVAC experts encourage pet owners to clean and groom those furry family members. 

Vacuum the Home Regularly

In addition to cleaning and grooming your pets frequently, Gilmore Heating and Air also recommends vacuuming your home frequently. This will get rid of any fur before it is sucked into the ductwork and filter.

This proactive approach will ensure that pet fur doesn’t put an unnecessary strain on the air conditioning system.

While the suggestions above can go a long way towards maintaining your HVAC system, many HVAC professionals recommend getting an annual HVAC tune-up with your local HVAC company. An annual tune-up performed by the experts at Gilmore Heating and Air is the best way to ensure that any defect will be caught early and rectified. This will keep your HVAC system working for many more years to come. 

Energy Efficiency and Your HVAC System



The Connection Between Energy Efficiency and Your HVAC System

When shopping around for your home’s heating, ventilation, and air conditioning system (HVAC), you’ll most likely focus on costs rather than energy efficiency. So, is price or energy efficiency more important? The short answer is both. At Gilmore Heating, Air, & Plumbing⁣, our HVAC experts share vital information about the connection between energy efficiency and your HVAC system. In this article, you’ll discover why energy efficiency matters to you.

Understanding Energy Flow

The purpose of an HVAC system is not only to warm or cool your space but to ensure comfortability and improve air quality. This is accomplished by fresh air being pulled from the outside or within the home (ventilation), which is brought into the air handling unit and drawn through filters. These filters help to remove dust, allergens, and other particles to purify the air. Then the air is sent to either be cooled or heated before cycling back out into the home. For most systems, the air moves through a network of ducts to different rooms. However, the air can also be centralized to specific rooms/areas of the house, depending on the system. 

Because there are a handful of steps before the air is purified and matched to the homeowners’ comfort, there are a number of ways to be more energy efficient with your HVAC.

Choosing the Right HVAC System

Deciding which HVAC system is right for your home can be a big decision. We asked Tureks Plumbing, a Fox Valley home-remodeling company for tips. They said that there are many factors to consider when investing in something for your home. They agree that an energy-efficient HVAC system will not only last longer but also improve home value. Plus, you’ll reduce your carbon footprint. Ultimately, an energy-efficient HVAC system is the way to go if you want to increase comfort, lower bills, and reduce energy consumption. 

Here at Gilmore Air, we will always make sure to give you plenty of options for energy-efficient HVAC products. Our Placerville HVAC experts are highly skilled in working with homeowners to find the best HVAC system for you and your family. We’re not just here for an HVAC installation – we’re here to help you through the entire HVAC replacement process from start to finish.

Committed to Quality Excellence 

At Gilmore Heating, Air, & Plumbing⁣, our team is continuously learning more about the latest Heating and Air technologies to provide you with the best HVAC service possible. Each of our certified HVAC technicians is committed to giving you a comprehensive plan to meet your HVAC comfort and energy needs. Whether you are looking to reduce high monthly energy costs, salvage your current system to sell your home, or want the most comfortable atmosphere available, we do it all.

Certified Energy Performance

Since 1979, we have been providing customers with the best service around. You can always count on us to give you honest and professional advice. We will never recommend an HVAC system that doesn’t have a long track record of exceptional performance. With the Gilmore Guarantee, you won’t have to worry about your HVAC system failing you when you need it most. If you need help selecting or replacing your HVAC system, contact Gilmore Heating, Air, & Plumbing⁣ today.

How Efficient is a 20 Year Old Furnace?



How Efficient is a 20-Year-Old Furnace?

At Gilmore Heating, Air and Plumbing⁣, we love helping our customers navigate their HVAC problems. You can always count on our Gilmore team to give you honest and professional advice. Sacramento homeowners often ask us, “How efficient is my 20-year old furnace?” In this blog, our trusted Sacramento HVAC technicians have put together the information you need to know about the efficiency of your 20-year-old furnace. 

So, How Efficient Is a 20-Year Old Furnace?

Unfortunately, at 20 years, no furnace is running as efficiently as it once was. 

For starters, HVAC repair experts confirm that any furnace that has been in use for 20 years is nearing the end of its lifespan. The components of a 20-year-old furnace suffer a lot of wear and tear over the years. The aging process plays a significant role in lowering the efficiency of the furnace.

Over the last few decades, technology has changed immensely. New technological advancements are being introduced every day, which is why cutting-edge technology two decades ago is obsolete today. Newer furnace designs and components are made to be more efficient and more durable, and these are attributes that are probably lacking in your furnace that has been in service for 20 years.

The U.S. Department of Energy indicates that a 20-year-old furnace wastes at least 22 % of the energy it consumes. In other words, you lose more than 2 dollars from every ten that you spend on heating your home.

Compare that to a new furnace whose AFUE (annual fuel utilization efficiency) rating is 95%, meaning that you only lose half a dollar for every ten dollars’ worth of energy consumed by your furnace. The rest is used to generate heat for your home. These differences add up over time, so a 20-year old furnace that isn’t as efficient as it once was is robbing you of your hard-earned money.

Signs That Your Furnace Is Inefficient

The thing with inefficiency is that it doesn’t happen overnight. Gilmore HVAC professionals say the drop in efficiency is normally a gradual process, so you are unlikely to realize it immediately when it happens. However, several signs suggest that your furnace is becoming inefficient. Here are the most telling signs according to the experienced HVAC repair technicians at Gilmore Heating and Air.

  • The gas bill is inexplicably higher than it used to be. We asked our friends at Tureks Plumbing Services, a plumbing company in Appleton, WI, if they often see this problem in home services. They said that any unusual increase in water or electricity bills is a good indication that something is not right. If you notice that your gas bill is now higher than it’s been in years, the chances are that the furnace is now working twice as hard to provide the same level of heating that it used to deliver.
  • The frequency of service calls has increased. If you are finding yourself calling a Folsom HVAC company regularly, then your components are working harder than they should and will continue to break down.
  • Hot and cold spots in sections of your home. Uneven heating can also occur in homes with new furnaces, but this is more common in households that have aging furnaces. If you have noticed hot and cold spots in different parts of your home, alongside the other signs mentioned earlier, then it is likely that your furnace is on its last life. 

Signs That Your Furnace Needs to Be Replaced

If your 20-year-old furnace exhibits the signs of inefficiency discussed above, Sacramento HVAC experts suggest that you lookout for the signs below before you start thinking about furnace replacement.

  • Old age. As already mentioned, a furnace that has been in service for two decades is on its last life. Age alone is a good indicator that your furnace will need to be replaced soon. So, speak with an HVAC company near me about your new furnace options.
  • The burner flame is now yellow. When the flame from the burner in your furnace becomes yellow, call Gilmore Heating and Air immediately. This means that your furnace is now generating carbon monoxide. This poses a grave safety risk, and HVAC replacement is the best solution to the problem.
  • No more heat. Have you noticed that you always feel cold in your home regardless of the temperature at which you set the thermostat? Sacramento HVAC repair technicians point out that your furnace may be so inefficient that it no longer generates heat. A new furnace is the best option. 

At Gilmore Heating and Air, we have extensive training and experience in helping people like you transition smoothly from their old furnaces to newer models. With the Gilmore Guarantee, you can rest assured that Gilmore Heating, Air & Plumbing⁣ is the best HVAC company for the job. Contact us today about any issues that you may be having with your furnace or any other component of the HVAC system. We will recommend the most cost-effective furnace that will address all your needs. 

Choosing the Right Sized Heat Pump for Your Home



Choosing the Right Sized Heat Pump for Your Home in Sacramento

One of the challenges that many Sacramento homeowners face is replacing their heat pump. If you live in an older home, your Sacramento HVAC repair technician will likely tell you that it’s time to replace your current heat pump with a new one. Choosing the right sized heat pump for your home can seem difficult at first. At Gilmore Heating and Air, we like to make the decision-making process as easy and as painless as possible, so we have compiled the following guide to help you get a fairly good picture of the system size that will address your needs.

Know Your Climatic Region

The first thing that you have to keep in mind when choosing the size of your heat pump is the region in which you live. This is because different regions or zones have different heating or cooling requirements. 

For example, Sacramento is in Zone 2, which isn’t as hot as the places found in Zone 1. Once you know your region (or zone in this case), you’ll have a better understanding of what size heat pump you’ll need for your Sacramento home.

Choose a System Type

The next decision that you have to make regards your preferred system type. Here, your choices are limited to either a system that can heat as well as cool your home or one that is only intended to cool the home. The HVAC professionals at Gilmore Heating and Air have seen an increasing number of homeowners opting for systems that can heat and cool the home as needed. Not sure? Discuss your heat pump replacement options with our Sacramento HVAC replacement technicians.

Determine the Size of Your Home

Folsom HVAC replacement experts explain that heat pumps come in different sizes so that the most appropriate one can be selected for a given property. If your house is 2,000 square feet, for example, then you may need a smaller sized heat pump compared to a home that is 4,000 square feet. Our friends at Tureks Plumbing, a Fox Valley plumbing company, agrees that the size of the home gives an idea about the total area for which you need a heat pump. So, the bigger the home, the larger the heat pump needed.

Determine the Heating Needed for Each Square Foot

As already mentioned, the different climatic zones have different heating requirements, and this plays a part in determining the right size heat pump for your home. For example, Sacramento lies within Zone 2, and each square foot of space in this zone requires 35-40 BTUs of heat.

To know the total amount of heat needed for your 2500 square foot home, multiply that square footage by the BTUs needed for each square foot. When you multiply 2500 by 40, you get 100,000 BTUs.

Your next task is to select a heat pump whose capacity can deliver the 100,000 BTUs. Gilmore HVAC professionals explain that heat pumps come with an energy efficiency rating. So, you will have to factor that in when selecting a unit.

For example, a unit with an output capacity of 100,000 BTUs and an energy efficiency rating of 80% will not give you the 100,000 BTUs you need to heat your home. This is because, at 80% efficiency, the unit can only give you a maximum of 80,000 BTUs.

However, if you select a unit with an output rating of 130,000 BTUs and an efficiency rating of 80%, the actual heat produced will be 104,000 BTUs, which is within the range you want.

Factors Affecting Insulation

As you may have noticed, the amount of heating needed for each square foot in any climate zone or region is given as a range, such as 35-40 BTUs for Zone 2. This range is provided to account for a number of variables, such as how well the home is insulated.

We asked Headwaters Construction Inc, a Sacramento commercial construction company, about insulation. They said that proper insulation is key to keeping the heat inside. If, for example, your home has large windows and isn’t properly insulated, the higher number will be the right one to use in your calculations. 

However, if you have a newer home with modern windows that provide a high degree of insulation, then the lower number in the range is the more appropriate one to use.

We recognize that despite our best efforts to explain how the right size of heat pump is determined, you may still be unable to select the right size heat pump for your Sacramento home. Rather than take a risk and end up with an oversized or undersized heat pump, we strongly recommend searching HVAC company near me. At Gilmore Heating and Air, our highly-trained and certified HVAC professionals can visit your home and assess your HVAC needs. Give us a call today!