5 Causes of One Hot Room in the House



5 Causes of One Hot Room in the House

One of the HVAC problems that we often get at Gilmore Heating and Air are complaints about having one hot room in the house even when the AC is turned on. Before this problem can be fixed, you’ll need to find the source of the problem. Here are the common causes of one hot room in the house.

Undersized HVAC Equipment

Over the years, the load that your Sacramento HVAC system is tasked with handling can change as different rooms evolve. For example, when you convert a bedroom into a home office, and you install electrical equipment there, the heat generated by the equipment may be too much.

Residential air conditioning company in Placerville says that as a system becomes undersized for the load, it has to bear, the furthest rooms from the air handlers will be the first victims to show insufficient cooling. Headwaters Construction Inc, a Sacramento commercial construction company, agrees that undersized HVAC equipment can play a big factor in properly cooling your space.

Gilmore Heating and Air techs will recommend the best option for you. For example, we may advise you to use ceiling fans or improve the insulation of your home. However, some cases may only be remedied by getting a bigger sized AC selected and installed by your Sacramento HVAC replacement technicians.

Warm Air Rising to Upper Floors

As you may know, cool air is denser than warm air. Consequently, warm air tends to rise while cool air occupies the lowest level in a conditioned space. This may explain why the rooms on the upper floor of your home are warmer than the rooms downstairs.

Residential AC service Placerville professionals can help to fix such a situation. For example, adjusting the air vents or dampers can deliver more conditioned air upstairs. Boosting attic insulation can also help, just as adding a ventilation fan in the attic can extract warm air. If all these conservative options don’t yield results, professionals may suggest that you install an HVAC system solely for the upper floor of your home.

Leaking Ducts

It is also possible that one room in your home is always hot because the ductwork is leaking. Such a leakage not only wastes energy but also creates room for other problems.

Fortunately, Gilmore Heating and Air have effective tools to test and establish which ducts are leaking. Thereafter, our residential AC maintenance personnel will seal and insulate the ductwork properly. 

Improperly Positioned Thermostat

The location of your thermostat will have a great bearing on the degree of comfort in your home. For example, if the thermostat is located near a heat source (behind an oven, for example), the sensor will get an inaccurate reading of the temperature inside the home. Therefore, you will get uneven cooling in the house.

Other unsuitable locations for a thermostat include close to exterior doors that are frequently opened. Your home’s thermostat shouldn’t be close to windows where direct sunlight reaches it.

When you complain about having a hot room in your house, Sacramento HVAC personnel will determine whether the location of the thermostat is ideal, in addition to checking for other possible causes. If the placement of the thermostat isn’t appropriate, we will relocate the device.

Dampers and Vents That Need to Be Adjusted

There has to be a balance in an HVAC system if it is to deliver satisfactory cooling throughout a building. However, renovations and alterations in the way rooms are used can throw this balance off.

For example, when a wall is removed during a remodel, the dampers and vents have to be adjusted to address this alteration. Otherwise, the bigger space created will not get sufficient cooling. 

As you can see, several factors can cause one room in your home to be hot. The best way to determine the cause behind this is by contacting your local HVAC company, Gilmore Heating, Air, and Plumbing. Our experienced professionals can fix the problem.

 

Replacing an indoor and outdoor HVAC unit at the Same Time?



Do I Need to Replace My Indoor and Outdoor HVAC Unit at the Same Time?

Are you stuck replacing an indoor and outdoor HVAC unit at the same time? You may be wondering why your Sacramento HVAC technician recommends replacing both systems, even if one is still working. The truth is, it is advisable to replace both units once one malfunctions. In this article, the HVAC professionals for Gilmore Heating, Air, and Plumbing explain why you need residential air conditioning replacement.

Matched Units Perform Better

Outdoor HVAC units are designed to work with corresponding indoor units to deliver the ideal system performance and efficiency. Gilmore HVAC professionals point out that when you replace the outdoor AC unit without installing a corresponding indoor unit, the system will still work. 

However, the mismatch between the indoor and outdoor units will compromise the dependability and efficiency of this new setup. In the end, you are likely to spend a lot more on this mismatched system than you would have spent if you had replaced the indoor unit at the same time as the outdoor unit.

Efficiency Ratings Are Moot When Units Aren’t Matched

One of the primary reasons why Sacramento homeowners buy new HVAC systems is the desire to benefit from the superior efficiency of those newer appliances. For this reason, the experts at Gilmore Heating and Air caution that buying an outdoor unit with the given SEER rating, such as 18 SEER, is unlikely to result in the expected energy savings. This is because the outdoor unit will not match well with your current indoor unit.

You Miss Out in the Latest Technology Benefits

Over the years, the technology upon which HVAC systems are manufactured has made tremendous strides. For example, the noise generated by an HVAC unit manufactured 20 years ago is a lot more than that from an equivalent unit manufactured recently. For this reason, Sacramento HVAC professionals recommend that you replace both units at the same time.

You Save When You Replace Both Units at a Go

It is highly probable that your current outdoor unit was installed together with the indoor unit. This means that they are of the same age. Chances are the indoor unit is also aging and will soon need to be replaced as well.

Residential AC service technicians advise that you are likely to incur installation costs twice. First, when you replace just the outdoor unit, and then shortly after, when the indoor unit also reaches the end of the road and must be replaced too. Replacing both units will save you time and money in the long run.

New Units Comes With New Warranties

One major benefit of installing a new HVAC system is that it will come with a manufacturer’s warranty. You also get a service guarantee from the installer of that new system.

Folsom AC professionals explain that if you replace the outdoor unit alone, then the indoor unit will soon be out of warranty since it isn’t as new as the outdoor unit you have purchased. Our friends at Headwaters Construction Inc., a construction company in Sacramento, often see this happen in their construction industry. It’s typical for systems to start failing one after the other.

Of more concern to Gilmore Heating, Air and Plumbing is the risk that many HVAC system manufacturers may void the full warranty on the new outdoor AC unit if that component isn’t matched with the indoor unit. This means that you will not enjoy the protection that comes with installing a new unit.

As you can see, you may be shooting yourself in the foot when you only replace one unit. However, you will be setting yourself up to incur higher costs in the long term. If you still have concerns about replacing your HVAC system, contact Gilmore Heating, Air, and Plumbing. Our experienced professionals will assess your HVAC replacement needs and recommend the most cost-effective system to address those needs.

Is It Too Late for a Summer HVAC Tune-Up? 



Is It Too Late for a Summer HVAC Tune-Up? 

At Gilmore Heating, Air and Plumbing, we normally recommend that you have your HVAC system tuned up by a professional at least once each year, preferably in the spring. So, is it is too late for a Summer HVAC tune-up? Our residential ac company in Placerville believes that it is never too late. In this article, we answer frequently asked questions about annual HVAC tune-ups. 

What a Tune-Up Does for Your HVAC System

An HVAC tune-up will help your system to work properly during the remaining weeks of the summer. The modest cost that you incur to have a residential AC service Placerville technician perform the maintenance will pay off in the following ways:

  • Enhanced performance and a cooler home
  • Improved system efficiency and reduced energy bills
  • Prolonged service life of the system

It is important for you to get an HVAC tune-up now even if you don’t think you will need air conditioning for much longer. It would be very inconvenient for you to turn the unit on, only for it to malfunction at a time when you can’t quickly get an HVAC repair professional to come and fix the unit.

The Sacramento heat waves are becoming more common, so make sure your central ac is up and running before then.

Can’t I Tune It Up Myself?

HVAC professionals do not recommend an HVAC tune-up by yourself. There are some maintenance activities that require technical expertise.

For example, most Sacramento homeowners can replace clogged air filters and clean the surroundings of the external AC unit on their own. However, not many can check to see if the ac system is up to the manufacturer’s specifications. Similarly, how many Sacramento homeowners can check the refrigerant level and safely capture any excess found in the system? Our friends at McQuillan Bros, the best air conditioning company in Minnesota, recommend hiring a professional instead of trying to manage it yourself. They agree that it’ll save you time and money in the long run.

You need a residential AC tune-up professional to check your HVAC system and ensure that it can perform its best throughout the year.

How AC Repair and Maintenance Differ

Folsom AC service technicians reveal that many Sacramento homeowners aren’t sure whether to call for residential ac maintenance or residential ac repair.

If the HVAC system is exhibiting noticeable defects, such as failing to turn on or being unable to cool your home even when the AC is on, then call an HVAC professional. Our Sacramento HVAC techs will find and fix the problem in no time.

For example, the Gilmore HVAC repair technician may find that the thermostat has failed and needs to be replaced so that the system can work as expected. As you can see, AC repair is basically about fixing defects as and when they occur.

However, HVAC tune-ups consist of optimizing the performance and longevity of your system. For example, the residential AC tune-up technician from Gilmore Heating and Air may find that some electrical connections in your system are loose. He or she will tighten those connections so that the system can work without disruptions caused by electrical failures.

Similarly, the service technician may find that the moving parts in the unit need to be lubricated, and he or she will do so. In short, AC maintenance is a more proactive undertaking geared at preventing defects from developing. Once defects are observed, HVAC repair will be recommended at the end of the service call.

You can then schedule to have the technician return to perform the needed repairs and purchase the necessary replacement parts.

How Best Can I Get HVAC Maintenance?

If you aren’t sure about your HVAC tune-up at this time, we suggest that you contact Gilmore Heating, Air and Plumbing about our residential ac tune-up specials or for more information about our HVAC services.

How to Inspect an AC Drain Pan



How to Inspect an AC Drain Pan

As warm air passes over the evaporator coils in your AC, water droplets form and drip into the condensate pan located beneath the evaporator coils. This condensate then flows out through the condensate drain line. However, problems can arise when the drain pan or drain line is clogged or damaged. Your AC may turn itself off, or your property may suffer water damage as condensation accumulates underneath the AC. To prevent these problems, Gilmore Heating, Air and Plumbing, the best HVAC company in Sacramento, recommends that you inspect the AC drain pan frequently, as explained below.

Step 1: Turn On the AC

It is advisable to start your inspection exercise by turning the AC on for about half an hour. This is ample time for the system to work and generate a sufficient amount of condensate to reveal any anomalies in the condensate drainage system.

Folsom AC service techs recommend that you observe the area around the indoor unit of your air conditioner. If you don’t see any moisture, chances are the drain pan, and drain line is working as they should. All the same, you need to proceed with the next steps outlined below, just to perform a thorough inspection.

Step 2: Turn the AC Power Off and Remove the Access Panel

Experts at Gilmore Heating and Air strongly recommend that you turn the power to the HVAC system off so that you reduce the risk of electrical accidents occurring while you check the drain pan.

Once you have unplugged the AC, remove the access panel so that you can see the drain pan situated inside the air handler.

Note that air conditioners usually have two drain pans. One is permanently affixed to the air handler, and it is located higher up from the auxiliary one that is easy to remove. Residential AC company in Placerville recommend that you restrict your DIY efforts to the auxiliary drain pan and let an experienced professional remove and replace the permanent drain pan since you may make a mistake that could cause bigger problems in your AC.

Step 3: Inspect the Drain Pan and Line

Residential AC maintenance personnel suggest that you use a flashlight to take a close look at the drain pan and the drain line leading away from it. See whether you can spot any visible debris or accumulations, or even damage to the drain pan.

If water is backing up in the drain pan, there could be a blockage in the drain line. Clean out any debris that you see in the drain pan and in the opening of the drain line.

Step 4: Test the Drain Mechanism

Pour a continuous stream of water into the drain pan and observe how effectively that water drains away through the drain line. If it is sluggish or backs up, Tureks Plumbing Services, a Fox Valley Plumbing company, suggests that you may have a clog or blockage in the drain line.

Step 5: Repair Minor Damage to the Drain Pan

If you notice that the drain pan is leaking, use epoxy glue to plug that small crack responsible for the leak. However, if the leak is large, Folsom AC service professionals recommend that it is a lot better to replace that damaged drain pan.

Replacing the drain pan is best left to professionals. Contact Gilmore Heating, Air, and Plumbing for expert help, especially if the permanent drain pan has a leak.

Step 6: Clean the Condensate Drain Line

Gilmore HVAC experts recommend that you clean the condensate drain line regularly in order to prevent dirt and debris from building up inside it.

Use a stiff brush to gently clean inside the drain line and remove any debris inside. You can then pour a cup of vinegar down the drain line so that any microbial growths (mold and algae, for example) can be killed before clogs develop.

In the summer, pour bleach down the condensate drain line as a way of keeping it clean. Gilmore Heating, Air and Plumbing only recommends using bleach during the summer because the constant use of the AC will generate ample quantities of condensate to wash out the bleach before it damages the drain line.

Step 7: Restore the Access Panel

Once you are satisfied with the work done in cleaning the drain line or fixing any damage to the auxiliary drain pan, restore the access panel to its position so that the air handler isn’t exposed. When everything is back in its place, residential AC maintenance personnel recommend that you power up the system and observe whether it is working well, and no condensation is accumulating beneath the air handler. If everything is as it should be, congrats!

The drain pan and drain line aren’t the only components that need regular maintenance and inspection in your HVAC system. In fact, the drain pan and drain line will have a reduced chance of developing defects if the entire HVAC system is serviced by a professional. If you haven’t had your AC system checked by a professional in a while, contact Gilmore Heating, Air, and Plumbing for a residential ac tune-up. Our experienced technicians will conduct a thorough inspection and tune-up the system so that it is back to working reliably and efficiently. Give us a call today and learn about our Sacramento AC service plans.