Common Furnace Problems

Common Furnace Problems

Your furnace is an important appliance in your home. As a homeowner, it helps to understand the things that might go wrong with some of your appliances. This way, you will not only know when to call for a furnace repair Sacramento, but you can also learn how to prevent some of them. 

After all, some of the issues that will arise with your furnace are completely avoidable. Gilmore Heating, Air and Plumbing, the best Sacramento HVAC company, shares the most common problems you will encounter with your furnace. 

Not Producing heat 

Your furnace’s job is to provide you with adequate heat throughout the cold season. Our friends over at McQuillan Brothers, St Paul HVAC company, explain that this is a big issue they see in Minnesota. The failure to produce heat is an indication that something needs fixing. There are a number of reasons why your furnace could be failing to produce heat. 

  • The wrong fan setting. This setting only allows the fan to blow air through your house but without any heat. 
  • The wrong thermostat setting. Your furnace uses a thermostat to help provide adequate heat. If the thermostat is off or not set to heat, or if the temperature setting is put too low, your furnace will not produce any heat. 
  • A faulty air filter. The air filter is important in preventing dust particles and debris from being blown inside your house. With time, the air filter will get clogged. This clogging will interfere with the supply of air to your house. This will stop the furnace from producing heat.  
  • Lack of flame for ignition. For a furnace to start working and warm up your house, the fuel has to be ignited. This is made possible by pilot light. In older furnaces, the pilot light is on continuously. Newer models, on the contrary, come with an electric ignition that ignites the pilot light at the start of every cycle. A problematic ignition prevents from lighting the flame which, in turn, affects the supply of warm air in your house. 

The furnace does not turn on automatically 

Your furnace cannot switch on without the help of your thermostat. The thermostat, on the other hand, monitors the temperatures inside your house triggers the furnace to switch on when a certain temperature is met. 

There are a number of things that could affect this system. For example, a low setting on the thermostats will mean that your furnace will only switch on if the house temperature lowers to a certain level. 

Check whether your circuit breaker is off. Sometimes, the circuit breaker could be off which hinders the automatic operation of your thermostat. If this is the case, contact Gilmore Heating, Air, and Plumbing about heating maintenance services Sacramento.

The Furnace is Leaking Water 

This happens with high-efficiency furnaces with an annual fuel utilization efficiency of over 90% (AFUE). This means that 90% of the fuel in your furnace is burnt to produce heat. 

These units usually have a cool exhaust feature, complete with a PVC exhaust pipe instead of metallic pipes. Also, the units will feature condensation pipes that collect the water produced during the burning of the fuel and drains it. 

Sometimes, and due to continued use, the condensation pipes can break or clog which allows water to pool at the bottom of the furnace. This affects the furnace’s ability to provide you with warm air and can lead to a slew of problems. 

Get the right help for your Furnace 

Your furnace’s ability to provide you with the best service is important in our overall comfort in your home. Call Gilmore Heating Air and Plumbing and enjoy the best heating company in Sacramento for Sacramento furnace installation and maintenance.

Do I Need Drain-Cleaning Services?

Do I Need Drain-Cleaning Services?

Is your home drainage system working properly? If not, you may be asking yourself: do I need drain-cleaning services?

The drainage system in your home is supposed to get rid of waste material from daily living. This waste material could prove harmful to you and your family if not disposed of correctly. A properly functioning drainage system shields you from all these troubles. 

However every now and then, your drainage system will require some cleaning from a plumbing contractor Sacramento. This will ensure that it remains clean and ready to get rid of these waste materials from your sinks and toilets. 

Today on the blog, Gilmore Heating, Air, and Plumbing share how can you tell that your drainage system may need a cleaning. Below are some of the most common tell-tale signs that you should hire a drain cleaning service Sacramento.

Overflowing Toilets  

This is usually a nasty and unhygienic event that could lead to health problems if not addressed immediately. While it is common for a toilet to overflow every now and then, especially in a house with many occupants, frequent overflows are an indication that your drainage requires attention from an emergency plumber in Sacramento

Water Backing Up 

You might notice water coming back up through your shower drain or sink after you flush your toilet, or use water in your home. This is yet another unsanitary situation that requires immediate attention. By looking up a plumber near me, you are guaranteed to find someone who will look into your drain and deal with any potential clogs. 

Bad Odors 

Bad odors are uncomfortable and should be dealt with immediately. Usually, a problematic drain will let water stay and start producing a funky odor that is usually unmistakable. You are likely to catch a whiff of this funky smell from your sink, shower, or yard. This is an indication of a problematic drain that should be cleaned immediately. 

Water Puddles in your Yard 

Unless it rained recently or someone poured water on your yard, there is hardly any reason why there should be puddles in your yard. Unless, of course, they are coming from a blocked drainage system. This usually happens when the sewer blocks and has to let off the excess water. 

 Such puddles are usually an indication of a big problem in your plumbing lines and should be dealt with immediately. It is also important to fix such issues early because it prevents other people from stepping on the puddles as they move in and out of the house. Also, the water might damage your yard and lead to additional costs. 

Slow draining on kitchen and bathroom drains 

This is one of the most common problems with many homes. You might notice this when using the sink. The water will take a considerably long time to clear out instead of draining away immediately. This can happen sometimes from clogged drains from hair, food, or other buildup. This is why Maid For Muddy Paws, House cleaning service Woodlands TX, recommends hiring a professional cleaning service to clear your drains.

However, in some cases, the water might even take as long as one hour to clear out. This is an indication of a blocked drainage system that requires cleaning from a plumbing company.

Getting Drain Cleaning Service near Me 

Handling a clogged drain with the urgency required is one of the best ways to keep your home systems running smoothly. It also saves you a lot of money because then the problems do not grow. Call Gilmore Heating Air and Plumbing today and enjoy the best drain cleaning services for your home. We also offer Sacramento toilet repair and trenchless sewer repair to assist all of your plumbing needs.

Signs That You Have a Leak

Signs You Have a Leak in Your Home

Are you afraid that you could have water leakage in your home? Every home, including yours, is susceptible to such problems. If, as a homeowner, you start to suspect that you could have a leak in your house, it helps to understand how most of these water leakages manifest themselves. Usually, there are signs that you have a leak.

Today, our Sacramento plumbing company shares some of the signs that you could have a leak in your house. 

Damaged walls and floors 

Water causes a lot of damage to your walls and floors. Usually, this kind of damage is easily visible because the wall will either stain or get damaged. If your walls are made of drywall, leaking water will soften it and lead to it crumbling. 

You might also notice damage on your floors such as an unexplained cracking or staining in your bathroom. If you have tiles they can also come loose due to water damage. If you notice damage to your walls and floors, contact an emergency plumbing company Sacramento right away.


Mold is a serious problem to have in your home. It presents a lot of problems for your respiratory system. Mold does well in damp conditions. Therefore, if there is a leak anywhere in your house you can be sure to have a mold problem. 

You can recognize mold in your house by looking around your house for any visible areas. Our friends over at Turek’s Plumbing, Fox Valley plumbers, explain that this can be difficult for their Appleton customers to spot. This is because mold does not always appear in easily accessible areas It could appear beneath your floorboards. 

A musty odor is, however, a sure way to determine whether you have mold in your house. A musty odor in your home means that mold is starting to grow and it is best that you deal with it immediately. 

Increased Water Usage 

Your water consumption will vary every year or season based on a number of factors. These changes should, however, be easy to explain. An increased usage of water in your home that can hardly be explained could be a sign of a hidden leakage. 

This is usually harder to spot if you live in a busy household. However, a significant hike in your water bills that cannot be explained could be a sign of leakage in your home. 

One of the best ways to check whether you have an unexplained leakage is to check your meter. OurPlacerville plumbing company explains that your water meter has an indicator of how many units of water you use. To check for leakage, turn off all the water outlets in your home and check the meter dial. This usually moves when water flows through the meter. Movement is an indication of leakage. 

In the event your meter does not have a dial, take the numbers on the dial and wait for some time, maybe an hour before checking the numbers again. Any change is an indication of leakage. 

Finding the best Sacramento plumbers for your leakage

Water leakage in your home is a common yet unwanted event that should be dealt with immediately. The best way to identify and fix a leak in your house is to involve a plumbing contractor Sacramento. Gilmore Heating, Air, and Plumbing will provide you with the best services to keep your house safe and comfortable for you and your loved ones all year round. Contact us today!

Furnace Repair vs Furnace Replacement

Furnace repair VS Furnace Replacement

Should you repair or replace your furnace? There are many things to consider when thinking about furnace repair vs furnace replacement. 

Deciding whether to repair or replace your furnace is a question most homeowners have at one point or another. For a homeowner, the less money you spend in your home, the better. However, there comes a time when you have to decide whether you need to keep on repairing your furnace or purchase a new one. 

However, how can one really tell that it is time to get a new unit? Gilmore Heating, Air & Plumbing, the best heating company Sacramento, shares a few things to consider before deciding on furnace repair vs furnace replacement.

Carbon Monoxide Emission 

Carbon Monoxide is an odorless, tasteless, and colorless gas that will kill you if you inhale it for a long time. More than 400 people die of Carbon monoxide poisoning every year with thousands more visiting the ER. 

Your furnace can potentially emit carbon dioxide. The fact that most people can hardly tell when it happens is what makes it a dangerous situation. In the event your furnace starts emitting carbon dioxide, Sacramento heating replacement is the next best option.

Outside of seeing the symptoms such as nausea, headaches, dizziness, among others, there are other signs that your furnace could be emitting Carbon monoxide inside your home. These include: 

  • A yellow flame on the burner instead of a blue. This usually happens when there isn’t enough oxygen to aid in combustion. 
  • Rusted pipes 
  • Accumulated moisture on your windows and surfaces such as walls
  • The furnace will exhibit streaks of soot

Age of your Furnace 

The older your furnace the more it is going to require more care. Normally, a standard furnace is built to last anywhere from 15 to 30 years. Of course, these numbers vary based on the brand, use, and other factors. Age can greatly impact the decision regarding furnace repair vs furnace replacement.

Regardless, the more you use the furnace, the more it will continue to wear out. Our friends over at McQuillan Brothers, the best heating company St Paul MN, explains that this means increased repairs. Their HVAC techs often see this happen to over-worked furnaces in a Minnesota winter. It also means that at some point, your furnace will stop working as efficiently as it used to and you will start incurring increased energy costs. This might be a good time to contact Gilmore Heating, Air and Plumbing, Sacramento heating installation company.

Energy Consumption 

Tracking your energy cost from simply looking at your furnace usage will require patience. This is because the energy use will change depending on the time of the year and the conditions of the weather. 

However, it is possible to see any noticeable change by comparing your energy consumption within similar seasons. For example, if your energy consumption for this year’s winter is higher than last year’s, reevaluate. If you have been using the system economically, this could indicate that your furnace is using too much energy. 

You might consider running Sacramento heating maintenance on the unit and stem these problems if your system is relatively new or younger than 15 years. You might also be forced to replace your system if it is older than 15 years. 

Number of Repairs Needed 

The truth is, at some point, your furnace will need more and more repairs to keep running. If this happens, it means that you will suffer some inconveniences and spend a lot of money on it. The best move for this kind of situation is to buy a new furnace 

Get the best Service for Your Furnace 

Keeping your furnace in top shape is always the best way to ensure that it serves you for a long time. Contact Gilmore Heating, Air, and Plumbing today to get the best Placerville heating services for your furnace all year long.