Reasons Why Your Toilet Won’t Flush

Reasons Why Your Toilet Won't Flush

Reasons Why Your Toilet Won’t Flush

One of the worst feelings is when you go to flush your toilet and the water rises. Is it about to overflow? Is there a blockage in the toilet? When you observe this happening, your immediate reaction may be to panic. However, our Sacramento toilet repair company assures you that there is no reason to be concerned. A toilet that won’t flush is a very common problem that is usually simple to resolve. 

Reasons Why Your Toilet Won’t Flush Sacramento

Reasons Why Your Toilet Won't Flush

Today on the blog, our Sacramento plumbing company will explain some of the most common causes of toilet blockages. Remember that safety is paramount in any home improvement work. If you are unsure about a work, it is advisable to delegate it to a Sacramento plumbing contractor. 

The Handle

Flushing the toilet and nothing happens? This can actually be excellent news because it is usually one of the simplest problems to resolve. If you don’t hear or see any water move when you press the handle, it’s likely that your toilet handle is detached. It’s as simple as reconnecting a couple of basic pieces to fix it.

Our friends at Turek’s Plumbing, Appleton WI Plumber, explains that when there isn’t enough water in the tank, the toilet won’t flush because it can’t discharge enough water into the bowl. Examine the back of the toilet tank to see whether this is the source of the problem. The water level should be one inch below the top of your overflow tube. In many circumstances, this is rather simple to deal with.

Sometimes it’s as simple as turning the flush valve. However, in some circumstances, the fundamental reason of this could be low water pressure, pipe leaks, or other issues that necessitate the services of a plumber.

Valve Issue

Does your toilet flush properly but then refuses to stop running? This becomes a problem since it makes it difficult to flush the toilet again in the future. A running toilet is also a problem because it wastes a lot of water. The underlying cause of this is frequently a bent or damaged flapper seal. You may need to replace it, which is a relatively quick and simple fix. Another potential issue is hard water buildup inside your fill valve, which can prevent it from properly shutting off. After watching a few lessons, you should be able to flush the fill valve on your own, but if you’re new to DIY, you should get the assistance of a plumber just to be cautious.

Your Toilet Is Clogged

In many cases, the problem is actually a clog inside the toilet. Toilets are only built to manage specific waste types and volumes. They can easily become clogged with items such as sanitary goods, a toy your child dropped in the bowl, or a significant piece of toilet paper.

You are obviously aware if your toilet is clogged. If there’s something in the bowl that won’t go down, you’ve got a clog. Small clogs at the surface can be handled by oneself. You might be able to get things moving again by plunging it or poking it with a toilet brush. If the clog is really obstinate, you or your plumber may need to use a toilet auger to enter inside and unclog the toilet.

You Have a Drain Line Issue 

It is possible that everything in your toilet is working properly, but your toilet will not flush at all. This indicates that the issue is deeper within your plumbing. The drain lines that transport trash to your sewage or septic system might develop a variety of problems. If a clogged drain line is the reason for your toilet not flushing, you may discover drains not working throughout the house. Water may back up into your sinks, showers, and tubs, or they may all drain slowly.

Your drain line, like a toilet, can become clogged. A plumber with an extra-long auger may be required to come out and clean it. A cracked or leaking drain pipe might potentially prevent your toilet from flushing. Trees and other roots from your yard might also grow into the drain pipe, necessitating the replacement of the entire drain line portion.

Contact Gilmore For Sacramento Toilet Repair

Finally, there are a variety of causes for a toilet that won’t flush. Some of these issues are quick and simple to resolve on your own, while others will necessitate the assistance of a qualified plumber. Contact Gilmore Heating, Air and Plumbing today for all of your plumbing needs. Our top-rated team would be honored to solve your plumbing problems.   

Request Service

How Can We Serve You?

We are so glad you’re here! Complete the form below to get in touch, claim your coupon, or simply join our email list. 

Common Causes of Leaky Faucets

common causes of leaky faucets

Common Causes of Leaky Faucets

Faucets are an essential component of every home. Thus, keeping them in good functioning order is critical. A leaking faucet not only disrupts sleep and increases the water bill, but it also produces an inconvenience that can range from bothersome to disastrous. Today on the blog, our Sacramento faucet repair experts share the common causes of leaky faucets.

The 4 Most Common Causes of Leaky Faucets 

Our Sacramento plumbing company explains that corrosion, mineral deposits on internal parts, or damaged gaskets, o-rings, or washers are common causes of a leaky faucet. Fortunately, most leaking faucets can be repaired by homeowners with the correct equipment and some basic plumbing knowledge. Ignoring a leaking faucet can turn a $200 fix into a $1,000 plumbing replacement. Furthermore, a leaky faucet wastes over a hundred gallons of water per month.

Additionally, our Sacramento plumbers explain the most frequent leakage problems include a dripping faucet, leaking toilet flappers, or leaking valves, all of which are easily repaired. However, the most common leakage issue is caused by a leaky faucet. As follows, repairing one can save over 10% of a homeowner’s water bill.

Do you require a quick faucet repair in Sacramento or other surrounding areas? Our Plumbing contractor Sacramento would love to assist. 

common causes of leaky faucets

What is the source of your leaking faucet?

There could be a number of reasons why your faucet is dripping. So, we got with our friends over at Tureks Plumbing, Plumber in Appleton Wi, to come up with  some of the most common causes of a leaky faucet.

Problem with the O Ring

A stem screw is used to secure the handle of a faucet. Thus, this stem screw is linked to a tiny disc known as the O ring. Additionally, it is a critical area where leaking can occur. Over time, the O ring might become loose or worn out, causing the faucet to drip near the handle. Furthermore, if this is the problem, replacing the damaged O ring will solve it. Thus, this issue is most common with cartridge faucets.

Corroded Valve Seat

In the compression mechanism, a valve seat connects the faucet and the spout. As follows, water sediment accumulation can cause the valve seat to erode, resulting in leaking around the spout region. Make sure to clean the valve seat on a regular basis with the assistance of a professional plumber.

Worn Out Washer

The washer is pressed against the valve seat with each use, and the constant friction causes it to wear out. As a result, there is dripping surrounding the spout. Additionally, dripping from worn-out rubber washers can be repaired by replacing the washer. Furthermore, a compression faucet has this type of leak.

Improper Washer Installation

If the washer is not put properly or is not the correct size, it might lead to a leaking faucet. We recommend getting a professional plumber to assist you in properly installing the washer, allowing you to say goodbye to your leak.

Hire a Professional Plumbing Company

We feel that our leaky faucet repair service could benefit a large number of people in Sacramento. Contact Gilmore and we’ll match you with a plumber who is perfect for your work and plan a convenient time for that person to visit.  

Request Service

How Can We Serve You?

We are so glad you’re here! Complete the form below to get in touch, claim your coupon, or simply join our email list. 

Signs You Have a Water Leak

Signs You Have a Water Leak

Signs You Have a Water Leak

Water leaks happen often. They can be extremely irritating, since plumbing work is generally buried behind walls and out of sight. When water begins to trickle out of fractures or fissures in the pipes, it can be hard to see. However, there are a few signs that you may have a water leak. 

Signs That You May Have a Water Leak in Sacramento

Fortunately, you don’t have to tear down your walls to find out whether you need Sacramento plumbing services. Water leaks make themselves known in a variety of ways. As follows, conscientious homeowners who watch for these signs may be able to get them fixed before the damage becomes overwhelming. However, the longer these warning signs go unnoticed, the greater the chance of a more serious problem developing in the future.

Signs You Have a Water Leak

Today on the blog, our Sacramento Plumbing Company share signs you have a water leak. 

Your water bill has increased.

Our friends over at Tureks Plumbing said that the first tell-tale sign of water leak, besides an actual leak itself, is a skyrocket in your water bills. The Plumbers in Appleton WI adds that if your daily water consumption hasn’t changed but you’ve seen a significant increase in what you owe, it’s a sign that there’s a leak somewhere in your plumbing.

Our Sacramento Plumbing Contractor suggest find your home’s water meter and monitor it on a regular basis to double-check your water use between bills. Additionally, if it’s flowing higher but your water usage habits aren’t changing, your pipes may need to be repaired. Or, you may need leaking faucet repair.

Your water pressure is reduced.

A leak might be the source of your kitchen faucet’s or bathroom shower’s frustratingly low water pressure. Additionally, another sign could be if your toilet appears to be taking longer to refill. Water that escapes through a break in the pipe does not flow to its regular outlets, causing it to come out with less force.

Low water pressure can be caused by a variety of issues, including partially closed water valves and blocked or corroded pipes. Thus, a significant leak, on the other hand, is a distinct possibility.

You detect mold or mildew spots.

Mold development can be accelerated by leaks in pipes located beneath walls, floors, or ceilings. As a result, noticeable stains appear on the surfaces of your home. Thus, you may frequently detect an unpleasant, musty odor that can only be caused by mildew.

Mold thrives in water pipes because they are both natural and easy sites for it to develop. They’re in high-humidity areas with minimal light exposure and almost no regular cleaning. Mold spores can spread throughout your home via the vents of your heating and cooling system, causing harm to physical items and posing health hazards.

There are cracks in the walls.

Even a minor water leak may be a devastating force. If your home’s foundation is constantly exposed to water, it may chip away at its structure over time. This is extremely aggravating because it’s nearly hard to notice when it’s happening. However, gradual foundation misalignment can cause wall structures to move, buckle, and possibly collapse.

If you see cracks appearing in portions of your walls, particularly vertical or diagonal fractures, leaky water may be causing your foundation to deteriorate. This is a great moment to call a plumber.

You see further evidence of water damage.

Mildew stains and foundation fractures aren’t the only apparent indicators of potential water damage in your home. Water damage may occur anywhere near a leak, especially if the outward indications develop gradually during seasons with little rain or snow.

Pooling water is indicated by peeling paint or wallpaper, warped walls or doors, damp carpets, collapsing flooring, and spongy ceilings or walls. Material changes, such as cracks in ceramic tiles or peeling vinyl or linoleum, may also be seen.

Again, if left untreated for an extended period of time, even the slightest leak may wreak havoc on the structure and surfaces of your house. Consider hiring a plumber if you see indications of rot or deterioration.

Sacramento Plumbing Coupon

Top-Rated Water Leak Repair in Sacramento CA

At Gilmore Heating, Air and Plumbing, we are all about helping Sacramento homeowners solve their toughest problems.  If you see any of these above signs, contact Gilmore Heating, Air and Plumbing  today. We’ll save you time and trouble by getting right to work. 

Request Service

How Can We Serve You?

We are so glad you’re here! Complete the form below to get in touch, claim your coupon, or simply join our email list. 

Benefits of a Tankless Water Heater

Benefits of a Tankless Water Heater

Benefits of a Tankless Water Heater

If you’re considering upgrading your water heater system, you may want to consider a tankless water heater. Tankless Water Heaters bring Sacramento homeowners tons of benefits, as our Plumbing contractor Sacramento explains below. If you’re looking to save money, space, and more, keep reading!

What are the benefits of a Tankless Water Heater?

Benefits of a Tankless Water HeaterAre you fed up with running out of hot water? That is not an issue when using one of these tiny, ultra-efficient devices that heat water on demand. Below, our Sacramento Plumbers discuss the benefits of a tankless water heater.

Conserves Energy

One of the first major benefits of a tankless water heater is that it conserves energy. Our  Sacramento Plumbing Company explains that a tankless water heater has gained widespread popularity due to its energy-efficient design. Additionally, it warms water just when it is required, rather than keeping a huge volume of water in a tank and heating it throughout the day.

Due to the cost-effectiveness of a tankless water heater, Tureks Plumbing, Appleton WI Plumbing Company, explains that homeowners all over are saving big on their energy bills. In addition, a tankless water heater consumes energy only when the faucet or shower is turned on, and hence does not operate constantly, even at night.

Because of this, homeowners may significantly reduce their utility expenses by up to 50% with a tankless water heater, depending on their consumption.

Conserves Space

If you have a conventional water heater, you may have difficulty maximizing the space in your home due to the tank’s size. However, with a tankless water heater, you may save significant space because you will just need to place the unit on the wall. With the space-saving feature of a tankless water heater, you may convert the additional space to something more useful.  Thus, this is a huge reason why many Sacramento homeowners are turning towards tankless water heaters. This is so especially in smaller homes where space is essential. As follows, contact us today for Sacramento Water Heater replacement

Enhances Property Value

A tankless water heater has a lifespan of up to 20 years, which is double that of a traditional water heater. Thus, installing a tankless water heater will either bring your home on-demand hot water for years to come, or it will increase your home’s property value if you ever sell. Additionally, a tankless water heater comes with a longer warranty. This ensures that you’ll have a dependable water heater in your house. Thus, you can easily repair if it suffers from wear and tear.

That is why you should get your tankless water heater from a reputable Plumbing company with years of experience in order to ensure that they will serve you well if you need to make a warranty claim in the event that your water heater fails to work properly. 

Promotes Convenience And Comfort

The last major benefit of a tankless water heater is that it promotes convenience and comfort. This is so because, of course, it’s preferable to have hot water on demand so you don’t have to wait too long if someone else has previously used heated water.

Water Heater Special Sacramento

Contact Gilmore For Water Heater Replacement Today

A tankless water heater offers several advantages to every household member, but particularly to those who value convenience and space-saving features.  Contact Gilmore today for Water Heater Replacement in Sacramento!  

Request Service

How Can We Serve You?

We are so glad you’re here! Complete the form below to get in touch, claim your coupon, or simply join our email list. 

When to Replace Plumbing Fixtures

when to replace plumbing fixtures

When to Replace Your Plumbing Fixtures

There comes a time where your plumbing fixtures need to be replaced. Today on the blog, our Sacramento Plumbers go over a few tell-tale signs that indicate when to replace your plumbing fixtures.  Call Gilmore Heating, Air and Plumbing for plumbing fixture installation today! 

When is Time to Replace My Plumbing Fixtures? 

when to replace plumbing fixtures

If you have a plumbing fixture that needs some love, we are here to help. Sometimes, it’s hard to tell if you need a plumbing fixture repaired or replaced. The only way to know what to do is to have a Plumbing Contractor Sacramento assess your situation and advise you on the best course of action. Plumbing fixtures are typically interchangeable devices that are linked to an existing plumbing system to distribute and drain water. Bathtubs, trench drains, sinks, showers, taps, toilets, and terminal valves for ice makers, dishwashers, and humidifiers are examples of common plumbing fixtures. The following are the indicators that tell when to replace your plumbing fixtures. 

Cracked Porcelain

With good maintenance, toilets normally last forever, and you don’t really need to replace. Oftentimes, they are replaced for an esthetic or decorative purpose. However, if you have leakage, our Sacramento Plumbing Company can replace the wax ring seal near the floor without having to replace the entire unit. However, if the porcelain cracks, there is nothing you can do. In this instance, your toilet is fully ruined, and you must replace it immediately. Contact Gilmore for Toilet repair services Sacramento.

Leaky Faucets

While most leaking faucets can be easily repaired by changing one of their internal components, most Sacramento plumbers and homeowners choose replacement due to the inexpensive cost of a new faucet. You can also replace your faucet for purely aesthetic reasons. Although a tarnished or nicked faucet will continue to function properly, it does not look appealing and most people choose to replace such fixtures. Contact Gilmore today for faucet leak repair Sacramento

Toilet Upgrade 

As water prices rise, changing a standard toilet to a dual flush toilet becomes an interesting option. Although your toilet continues to function normally, you should be aware that there are more efficient alternatives on the market in terms of water use. Sometimes, such as when remodeling, upgrading is required merely for esthetic reasons. Of course, replacing your plumbing fixtures while remodeling includes sinks, bidets, showers, and bathtubs.

Broken Shower Hoses

The shower hose is one of the plumbing fittings that is most prone to wear and strain. Our friends over at Turek’s Plumbing, Plumber Appleton WI, explains that this is one of the most common plumbing fixtures that work with in customer’s homes. Everyone keeps it in one place. Many people drag it up and down numerous times a day, putting the shower hose at risk of rupturing or breaking. In such circumstances, you must replace it entirely with a new one. Often, this requires replacing the complete shower system, with the exception of the wall-mounted components.

Sacramento plumbing special

Plumbing Services in Sacramento 

Do you need someone to replace a leaking fixture or install a new one? Contact Gilmore Heating, Air and Plumbing today.

Request Service

How Can We Serve You?

We are so glad you’re here! Complete the form below to get in touch, claim your coupon, or simply join our email list. 

Common Water Heater Problems

common water heater problems

Common Water Heater Problems

Picture this: it’s Monday morning, and you’ve just gotten out of bed to start a hectic work week. You switch on the shower and wait for it to warm up. However, it never warms up. Only cold water spews from the shower head. What do you do? Our Sacramento Plumbing Pros discuss common water heater problems. 

Common Hot Water Heater Issues and Solutions

Oh no… your water heater is not working. What do you do?  Today on the blog, our Sacramento Plumbing Contractors discuss common water heater problems and solutions. 

Common Water heater problems

When Your Water Heater Stops Working

First and foremost, do not panic. Although it is not a pleasant way to begin the day, it is very normal for a water heater to fail. The best thing to do is to contact a Sacramento Plumbing Company so you can get on with your day.

When contacting a plumber about hot water tank problems, it is best to know the age of your tank, the height of the tank, and the type of vent.

Typical Hot Water Heater Issues

A broken hot water heater may be caused by a variety of factors.  As follows, it is important to understand how to solve the problem, or at the very least how to explain the problem to a professional plumber.

In the best-case situation, a water heater that isn’t working is actually due to the pilot light going out. If this is the case, simply relighting it can resolve the problem.

If that doesn’t solve your water heater problem, we’ll have to dig a little deeper.

1. Problems with Water Temperature

We have water temperature problems, which is one of the most common concerns about water heaters not working. As follows, this can be caused by either insufficient heating of the water or by the water being much too hot. In most situations, simply go to the water tank and change the tank’s thermostat. It may have been accidentally bumped, causing the temperature to change. Turning down the temperature of the water tank is another popular practice for saving energy during the summer months. Increasing the temperature of your thermostat during the winter months can solve your temperature problem.

If the water does not heat up when the temperature is raised, you might have a defective thermostat. The thermostat must be replaced as a solution.

2. Water that is discolored or smells bad

Another common issue with water heaters is odorous or discolored water.

If the problem is water discoloration, it is most likely caused by high mineral levels such as iron and copper, which cause the pipes to rust.

Our Plumbing Contractors Folsom recommend installing a water softener device in your home is a popular solution to this issue.

While this is not harmful to your overall health, it can cause plumbing issues that affect the performance of appliances.

3. Water Heater is Making Noises

A noisy water heater does not normally cause alarm in most people, but it can be distracting. Tureks Plumbing, the best plumbing company in Appleton, WI explains that a noisy water heater may be caused by a number of factors, such as excessive mineral and sediment buildup. 

To prevent this from happening in the first place, flush your water heater on a regular basis, usually once a year. However, if you hear a boiling tone, this is the sound of the device overheating, causing dangerous pressure buildup.

4. Water Heater Leak

If you’ve noticed a drop in water temperature, your water heater could be leaking. Thus, it is important to identify the source and cause of the leak before attempting to fix it.  Unfortunately, If it’s a corroded water tank, you’ll need to repair it.

Water Heater Special Sacramento

Water Heater Replacement Services in Sacramento, CA

If you think you may just need a new system altogether, we are here to help! Contact Gilmore Heating, Air and Plumbing today to discuss your Sacramento water heater replacement options. We offer traditional and tankless water heater options. 

Request Service

How Can We Serve You?

We are so glad you’re here! Complete the form below to get in touch, claim your coupon, or simply join our email list. 

How to Fix a Running or Leaking Toilet

How to Fix a Running or Leaking Toilet Sacramento

How To Fix a Running or Leaking Toilet?

Have a toilet that just won’t stop running or leaking? Many homeowners have had to experience this frustrating issue. Today on the blog, our Professional Plumbers share how to fix a running or leaking toilet.

How to Fix a Running or Leaking Toilet

We understand that not everyone wants to hire a Sacramento plumbing company for a simple DIY issue. In some situations, you fix a leaky toilet yourself. However, it’s always recommended to contact a Sacramento plumbing service to do the job. Toilets, like cars, come in different versions, but they’re all essentially working the same way to perform a similar purpose. In the article below, our Sacramento plumbers share how to fix a running or leaking toilet. 

How to Fix a Running or Leaking Toilet Sacramento

The Toilet is Running 24/7

If the fill valve doesn’t turn off at all, you’ve got a working toilet. In most situations, the filling valve would be partially closed. Thus,  the water does not flow at full force, but it may still waste a few gallons of water every hour. This is why it needs to be repaired as soon as possible.

The flapper or canister seal may be the culprit, and it may need to be replaced. However, the issue may be even simpler. The chain connecting the flapper or canister to the flush handle may be too short. Thus, this prevents the flapper or canister from sitting on the flush valve and creating a watertight seal. If that’s the case, all you have to do to repair your leaking toilet is lengthen the chain by a couple of notches.

Another potential trigger is a filling valve that is stuck or malfunctioning so that the water is not shut off. The filling valve float (the part that rises with the tank water and finally shuts off the filling valve) may be trapped on the valve shaft, and sometimes the valve simply stops working. In any case, a fast replacement of the entire filling valve is simple to repair. If you need more help, you may need to seek toilet repair services Sacramento.

The Toilet Tank Overfills

The filling valve may also trigger a running toilet, because when it is not properly balanced, the tank overflows and the excess water spills into the overflow channel. It’s very clear to see this happening. If you have an old ball-cock-style filling valve, unscrew the ball to lengthen the armature. Or, you can bend the armature to make the ball sit deeper in the tank. To change the filling valve of the Fluidmaster cup, lengthen the rod that attaches the float to the valve by unplugging it or unplugging the nut on top with the screwdriver.

Fill valves also have an adjustment screw on the top of the valve body. Additionally, you can improve the sensitivity of the valve and make the valve shut down earlier. You can do this by turning the screw clockwise with a screwdriver. Sometimes, the valve is only worn out and needs to be replaced. Luckily, that’s an easy DIY project and the valves are cheap. However, if you are searching for a plumbing service near me, our Sacramento plumbers would be happy to get your toilet running smoothly.

The Toilet Tank is Leaking

A leaking toilet will drip water to the floor below the tank. When this happens, it’s typically because the toilet tank bolts are loose or the seals around them break. We asked our friends over at McQuillan Brothers, Twin Cities plumbing company what they recommend. John McQuillan suggests that, first, try to tighten the bolts with a screwdriver, and if that doesn’t stop the leak, drain the tank, cut each bolt and replace the rubber gasket around the head. You can use the bolts again, but it’s probably a good idea to fix them as well.

If the tank is still leaking, check for signs of a hairline fracture. So, if you notice any, repair the tank or the entire toilet. However, if you don’t see any signs of cracking, the next thing you need to do is remove the tank from the bowl and replace the rubber gasket between them, called the spud washer.

There’s Water Around the Toilet Base

If you see water on the floor around the bottom of the toilet, that means that the wax ring is leaking. Although there may be many explanations for this, the solution is often to remove the toilet. If you’re squeamish, this is the toilet repair you want to stop, because things are going to get yucky. Scraping off old wax isn’t inherently unhealthful, but you definitely want to wear gloves when doing that because it’s a messy job.

There’s a good reason to call a Sacramento plumber if things get to this point. The wax ring can leak because the bottom of the toilet is too far away from the toilet flange, which is the fitting that holds the toilet to the floor. This is easy to patch, but it is also likely that the flange is corroded and needs to be fixed or replaced. This is always a job for someone with the right equipment and know-how. You can always count on Gilmore Plumbing, Heating, Air, and Plumbing to lend a hand. We offer Sacramento valley residence 24/7 emergency home services. Don’t wait until your plumbing problem gets works, contact Gilmore today!

Request Service

How Can We Serve You?

We are so glad you’re here! Complete the form below to get in touch, claim your coupon, or simply join our email list. 

How Do I Decide the Right Size of the Furnace For My Home?

Another consideration before new furnace installation is climate. Being that Twin Cities, MN gets extremely cold in the winter suggests that you get a powerful furnace. Selecting a furnace that is going to last in colder climates is key.  

Request Service

How Can We Serve You?

We are so glad you’re here! Complete the form below to get in touch, claim your coupon, or simply join our email list. 

Signs That You Have a Leak

Signs You Have a leak

Signs You Have a Leak

Are you afraid that you might have water leakage in your home? Unfortunately, every home can be susceptible to water leakage, making it extremely important to be aware of the signs that you may have a leak.

Today, our Plumbing Professionals share their knowledge on the common signs that your Sacramento home may have a leak.

Signs You Have a Leak in Your Home

Are you afraid that you could have water leakage in your home? Every home, including yours, is susceptible to such problems. If, as a homeowner, you start to suspect that you could have a leak in your house, it helps to understand how most of these water leakages manifest themselves. Usually, there are signs that you have a leak.

Signs You Have a leak

Damaged walls and floors 

Water causes a lot of damage to your walls and floors. Usually, this kind of damage is easily visible because the wall will either stain or get damaged. If your walls are made of drywall, leaking water will soften it and lead to it crumbling. 

You might also notice damage on your floors such as an unexplained cracking or staining in your bathroom. If you have tiles they can also come loose due to water damage. If you notice damage to your walls and floors, contact an emergency plumbing company Sacramento right away.

Mold 

Mold is a serious problem to have in your home. It presents a lot of problems for your respiratory system. Mold does well in damp conditions. Therefore, if there is a leak anywhere in your house you can be sure to have a mold problem. 

You can recognize mold in your house by looking around your house for any visible areas. Our friends over at Turek’s Plumbing, Fox Valley plumbers, explain that this can be difficult for their Appleton customers to spot. This is because mold does not always appear in easily accessible areas It could appear beneath your floorboards. 

A musty odor is, however, a sure way to determine whether you have mold in your house. A musty odor in your home means that mold is starting to grow and it is best that you deal with it immediately. 

Increased Water Usage 

Your water consumption will vary every year or season based on a number of factors. These changes should, however, be easy to explain. An increased usage of water in your home that can hardly be explained could be a sign of a hidden leakage. 

Finding the best Sacramento plumbers for your leakage

Water leakage in your home is a common yet unwanted event that should be dealt with immediately. The best way to identify and fix a leak in your house is to involve a plumbing contractor Sacramento. Gilmore Heating, Air, and Plumbing will provide you with the best services to keep your house safe and comfortable for you and your loved ones all year round. Contact us today!

Request Service

How Can We Serve You?

We are so glad you’re here! Complete the form below to get in touch, claim your coupon, or simply join our email list. 

Common Sacramento Plumbing Emergencies

Common Sacramento Plumbing Emergencies

6 Most Common Sacramento Plumbing Emergencies

There are many different plumbing issues that can arise in your home. From a leaky faucet to a major pipe leak, our team has really seen it all!

Today on our weekly blog, our plumbers share the most common plumbing emergencies we experience in Sacramento.

6 Most Common Sacramento Plumbing Emergencies

Plumbing issues come in all sorts of sizes and shapes, from the minor and inexpensive issues such as running toilet or dripping faucet to major pipe leaks that could cause a lot of damage to floors, walls, and other personal property. We see common Sacramento plumbing emergencies each and every day.

This is why it always comes in handy to have an emergency plumbing contact, in case you have any issues with your plumbing. Knowing that you can reach out to a licensed professional plumber from Gilmore Heating, Air and Plumbing when a problem such as your sewage backing up or flooding should put you at ease. 

You should not try to do any major plumbing repairs on your own. You should, instead, contact Sacramento plumbing service providers for any emergency plumbing issues and leave it up to the professionals who can handle it. 

We have compiled a list of the most common plumbing problems in houses as well as their causes. 

Common Sacramento Plumbing Emergencies

Types of Plumbing Issues

Clogged or Running Toilet

If you try flushing your toilet and the bowl fills up but doesn’t drain away, then you have a blockage. Blockages are usually caused by a mixture of human waste and tissue paper. You can use a plunger to try to fix a clogged toilet. If that does not work, then a drain auger or sewer snake may be used to help loosen the blockage.

A running toilet, on the other hand, is a more serious issue. Not only do you not have access to your toilet anymore but you lose up to 200 gallons of water a day. There’s also the potential for unhygienic situations and water damage. 

According to leading Sacramento emergency plumbers, the most common cause of a running toilet is a faulty flapper valve. This is the valve that controls the water that goes to the bowl from the tank. You can turn off the valve on the feed line to stop your toilet from overflowing.

Then, call a licensed plumber from an emergency plumbing company in Sacramento to help assist with this problem.

While you wait, you should place a couple of thick clothes or towels on the floor to absorb the water from the running toilet. This will help prevent damage to your floor.

Your wedding ring fell down the drain

This may be slightly embarrassing but ensure you do not make it worse by pouring water down the drain. Call a local plumber from a Sacramento plumbing company. The ring is most likely stuck in the p-trap. The plumber will disassemble the drainpipe and retrieve it, so do not need to panic.

Burst sewer or water pipes

This mostly happens during the winter when a pipe freezes over. Our friends over at Turek’s Plumbing, emergency plumber Appleton WI, see this a lot with their colder temperatures. A rise in pressure along the pipe due to ice forming may lead to flooding or lateral bursting. 

The only way you can fix this issue during the winter is to find your water shut-off valve and turn off your water supply. After doing this, you should call a professional Sacramento plumber from Gilmore Heating, Air and Plumbing to replace your broken sewer or water pipe.

Lack of water

If you have no water coming from your faucets in the bathroom or kitchen, Sacramento plumbers recommend that you ask your neighbors if they are experiencing the same plumbing issue. Often, these issues can be neighborhood-wide. If they say yes, then the issue may be due to a municipal water problem. However, if they say no, then there might be a problem with your water main, like a severe leak.

Call a plumber from Gilmore Heating, Air, and Plumbing to your home and have that checked out so they can ascertain what exactly the problem is and advise on how to proceed, or alternatively, they could repair it. 

Low water pressure

If your water is coming out of your faucet trickling rather than gushing, then this may be a sign of low water pressure. This mostly occurs in old homes.  

This may be caused by leaking pipes that may have broken, become worn, or corroded over a period of time. Other times, though rarely, it can also be caused by a sediment build-up as well as mineral deposits on the aerators. 

Sewer system backup

These system backups are usually expensive to fix, inconvenient, and also rather smelly! If your toilets are not flushing or your drains aren’t draining, and all this is accompanied by a foul odor of human waste, this might be the issue. 

The common causes of this include:

The main is blocked

To minimize the chances of this happening, avoid flushing diapers, wipes, or pads down the toilet. 

 

Tree roots have intruded into the pipes

Roots can push through pipe cracks or crush pipes when they surround them.

The old sewer lines collapsed

While sewer lines these days are made of plastic, they used to be built from clay or cast iron, which decays over time. This decay can trigger some rather serious plumbing emergencies!

Contact A Sacramento Plumber Today

No matter what scale of plumbing emergency has befallen your home, we at Gilmore Heating, Air, and Plumbing are up to the job. Contact us immediately and we will resolve the issue quickly and effectively.

Request Service

How Can We Serve You?

We are so glad you’re here! Complete the form below to get in touch, claim your coupon, or simply join our email list. 

What is Trenchless Sewer Repair?

What is trenchless pipe repair Sacramento

What Is Trenchless Pipe Repair?

So, what exactly is trenchless sewer repair? Today on the blog, our specialists dive deep into trenchless sewer repair and the many benefits that this no-dig service offers! Head to our blog site to learn more!

What Exactly is Trenchless Sewer Repair?

The cost of repairing residential sewer pipes should not be underestimated. Since sewer repair involves digging up your yard to access the lines, it can be a time-consuming and costly service. Most El Dorado County homeowners will experience sewer problems at some point, whether that be cracked, corroded, or broken pipes. Sometimes, your Placerville plumber may suggest replacing all your sewer pipes instead of one section. We know that this can be very inconvenient, but thanks to our “no-dig” plumbing solutions, we can fix your plumbing problems in no time. You may be wondering, “What is trenchless sewer repair?Today on the blog, our plumbing professionals share the must-knows about trenchless sewer repair.

What is trenchless pipe repair Sacramento

A Little About Our No-Dig Sewer Replacement Option

Using trenchless sewer line repair technology, we replace your water lines and sewer pipes effectively and efficiently. This no-dig solution prevents us from having to dig up your well-scaped lawn or driveway. The cost of this service depends on a few factors. Some factors include location, the layout of your property, and the technique used. Below are the pros of trenchless sewer repair Sacramento.

The Repairs Are of a Higher Quality

Our experts use state of the art equipment and high-quality materials in the mending of your broken sewer pipes. Meaning you end up with durable pipes that are less susceptible to corrosion, rust, or cracking. This is because the pipes are encased with an epoxy resin that can last for up to 50 years. 

Additionally, the pipes will not fragment if tree roots invade and entwine around them.

Repairs are Time Efficient

Our skilled Placerville plumbers may carry out the restorations in under a few hours or at most a day. This is mainly dependent on the extent of the damage on your pipes. Trenchless repairs are also an intelligent investment choice with lots of benefits.

In addition to this, it may also end up saving you money if your contractor charges an hourly rate.  

Less-Intrusive Methods Are Superior to Traditional Methods

Trenchless pipe methods use already existing pipe designs to do repairs, thus eliminating the need for digging, thereby leaving your landscape and yard intact.

Trenchless Sewer Repair is More Eco-Friendly

Non-invasive trenchless sewer line repairs are environmentally friendly. Additionally, Tureks Plumbing, a plumbing company that offers trenchless sewer in Appleton, WI, says that trenchless repairs are also up to the industry’s standards and last for long periods of time.

So, how will you know if a trenchless sewer line restoration is the best fit for you? 

Sewer Line Repairs Mend

  1. Trenchless sewer repair fixes underground piping, with special focus on homes, apartment buildings, and below surface landscaping.
  2. Trenchless sewer techniques may be used to repair broken or blocked pipes that have fractured due to household debris or tree roots.
  3. Sewer backups and leaky sewer lines are commonly a result of wrongly installed pipes. Using trenchless sewer methods remedies this.
  4. Water pipes crack as a result of movement in the house or underground. 
  5. Pipes damaged by constant thawing and freezing
  6. Trenchless methods may also be utilized in the installation of larger water lines in your house.

Pipe Relining

Other methods for pipe repair may include pipe relining. This technique involves the insertion of a hardened lining material into an existing pipe. The lining material creates a newer, firmer pipe inside the broken outer pipe, thus eliminating the need to dig up and remove old and broken pipes then replacing them with new pipes. Check out trenchless sewer repair in Placerville to learn what Gilmore Heating, Air, and Plumbing can do for you.

Pipe Pull Method

Another technique is the pipe pull method. This technique swaps out damaged water lines or sewer lines with new pipes using a small hole located at the back and front of the piping run. The broken sewer line is used to guide the new piping into place. Every replacement pipe has an estimated lifespan of a hundred years. The piping is also chemical resistant, code-compliant, leak-proof, and root-resistant.

We Offer Quality Plumbing and Repair Services 

Gilmore Heating, Air and Plumbing offer drain cleaning, plumbing maintenance services as well as complimentary pipe inspections. Steer clear of contractors who may suggest digging up your lawn in order to fix damaged or burst pipes. All our employees are well trained and skilled individuals who are well versed in different trenchless sewer repair techniques. You will, therefore, get professional advice about the most suitable technique of repairing or replacing sewer or water pipes. 

In the event that your sewer line is damaged, drains are clogged up, or you require new drain installations, give us a call at Gilmore Heating, Air, and Plumbing. We will have your sewer line up and running efficiently once more in no time. We are always up for the task!

Additionally, our plumbing services are cost-effective and are offered at pocket-friendly rates. For any queries you might have, we are available 24/7, so contact us today!

Request Service

How Can We Serve You?

We are so glad you’re here! Complete the form below to get in touch, claim your coupon, or simply join our email list.