3 Ways to Clean Your Heating System

Cleanliness is essential to keeping your furnace running in top condition all winter. At Gilmore Heating Air and Plumbing⁣, we recommend the following three tips to help clean your heating system

1. Change Your Air Filter

One of the simplest DIY maintenance practices you can do to maximize your air quality and your HVAC system’s efficiency is to clean the air filter. Locate your furnace’s access panel, located outside the furnace. Next, simply open the door inside and remove the filter. If the filter appears to be dirty, you will need to clean or replace it. Clean non-disposable filters with a non-toxic cleaner and water.

2. Clean Your Furnace’s Interior

Thoroughly clean the inside of your furnace by first unplugging its power cord. Next, dampen a cloth or towel with water and apply a non-toxic cleaner. Using the towel, clean the inside of the furnace, removing the fan from its location. Follow up with a vacuum then return the fan. Secure all wires and connectors, connect the power cord, and close the interior door and front panel of the furnace. If you are unsure of how to clean your furnace, contact our licensed HVAC professionals. In addition to cleanings, we do repairs, replacements, and annual routine checkups to keep your HVAC system running optimally.

3. Clean and Vacuum the Heat Exchanger Block

Start by turning off the gas, if your furnace is a gas unit, and disconnect the power cord. Next, use a toothbrush to scrub the buildup from each chamber. Using a vacuum with a narrow attachment, vacuum each chamber.

Furnace Cleaning in Placerville

When in doubt, call in the professionals to clean your furnace. From our founding in 1979, our business has remained committed to providing heating and cooling services. We offer a lifetime guarantee on the quality of our workmanship. Let us know if you require additional service due to an issue arising from our installation service. We’ll return and correct the problem free of charge. Call Gilmore Heating Air and Plumbing⁣ today to receive a consultation from one of our knowledgeable technicians.

4 Steps to Take Before Turning on Your Furnace

Fall is the time of year when you prepare to turn on your furnace. There are a few simple steps you can take in order to ensure the seamless operation of your heating equipment throughout the cold months. Your comfort and health depend on a properly functioning furnace, so don’t neglect to find time in your busy schedule to follow these four steps.

1. Change the Air Filter and Check the Ducts

Changing your air filter at least every three months is recommended for keeping your furnace efficient and operational throughout the cold months. If you can’t remember when the last time you changed the air filter was, simply make it a habit to replace the filter every fall before turning on your furnace.

Clearing any blockages in your ductwork before turning your furnace on will make sure that there is proper airflow for heating your home. If this is a task you cannot find time to do, you can have a reliable professional clean your ducts while also performing a full inspection or maintenance on your furnace.

2. Make Sure Vents Are Clear

Clear vents are important for unobstructed airflow. Wipe them down to prevent debris from accumulating.

3. Check for Air Leaks

Doors and windows are the most common culprits for air leaks. Seal off any leaks by weatherstripping or caulking. This will make sure your furnace is not overworked trying to deal with the heat lost through these cracks and spaces. Estimates show that up to a staggering 30 percent of energy costs can be attributed to air leaks that could have been easily sealed.

4. Schedule an HVAC Maintenance Appointment

Regardless of any preparation done on your part, it is recommended that you schedule a thorough inspection of your furnace by an experienced professional. This will allow you to discover any small problems before they become big ones, and it will extend the life of your equipment.

If you are located anywhere in the Sacramento area, you can turn to Gilmore Heating Air & Plumbing⁣ in Placerville, CA, to arrange an HVAC maintenance appointment with one of our friendly and knowledgeable technicians. We perform high-quality heating and cooling installation, repair, and maintenance for all make and models. Call us today.

Preparing Your Thermostat for Heating Season

Your heating system’s thermostat doesn’t draw attention to itself. The small box connects to the wall and engages the heater when you adjust the dials. Yes, the concept is simple and doesn’t appear to require any effort on the homeowner’s part. Don’t think you don’t need to care for the thermostat at all, though. Prepping it for the heating season could help you avoid troubles.

Check and Change the Batteries

Many thermostats require standard batteries to operate. Once the batteries die out, you can’t send any commands to the furnace. Avoid getting caught by surprise on a cold night. Check the battery’s power levels before the temperature drops. Replace batteries that are dead or dying, and keep extra batteries in a drawer to be safe.

Consider an Upgrade

Is your current thermostat outdated? If so, then you might wish to consider purchasing a new one. Older thermostats reaching the end of their life expectancies might not be the best choice for someone worried about failures and mishaps. Think about speaking with a heating company’s rep to discuss whether you need a new one. Gilmore Heating Air & Plumbing⁣ provides essential services for heater installations and related components.

Choose the Best Programmable Thermostat

A programmable thermostat allows you to type in commands that set temperatures for desired days and times. Look carefully at the number of days you can program the unit. Some units allow you to set a separate program for every day of the week, and others may only allow one setting for the entire week. Look at your schedule, and make a choice that fits it.

Consider Connections to a Smart Home System

Smart home systems tie together many different electronic devices in the home. Locks, lights, cameras, and thermostats might be compatible with a smart home service. A smart system for the home brings forth many benefits, one of which is remote access. If you can change the settings on your temperature from a smartphone, then you can raise or lower the temperature as needed. This way, you don’t waste energy while at work, and you can make sure the temperature is agreeable when you arrive.

Prepping your thermostat may require a little help. Call Gilmore Heating Air & Plumbing⁣ if you need our assistance in Placerville. We can also help you with your air conditioning and plumbing system.

How to Save Money on Heating Bills this Winter

No one likes to see their heating bill in the middle of the winter months. No matter what type of heating system you have, it obviously needs to run more during the colder months. Yet, this does not mean it has to cost you heavily. If your current system is not efficient, it may be time to consider why. With the help of our team at Gilmore Heating Air and Plumbing, we can help you uncover ways to save money.

Get Your Heating System Professionally Maintained

Even if it is the middle of winter, having a professional provide maintenance on your system is the most important step in ensuring your heating bills are as low as possible. The key here is that we can spot problems and fix them before they cost you money. Proper cleaning and efficiency checks can offer so much information about the way your system is running. It can also help you avoid costly emergency repair bills.

Add Insulation

Keeping the air in your home after it is heated there helps reduce your costs. This may mean you need to add attic insulation. You may also need to consider new windows if those are very bad. Our team can help you find the cold spots costing you money. Insulation, though, is one of the best ways to reduce your costs.

Thermostat Updates

You may want to consider moving towards a more efficient and programmable thermostat as well. You do not have to invest in home automation here, but it is wise for you to take the time to choose a programmable thermostat. These work to reduce your costs by keeping your air at the right temperature throughout the day, based on your needs at that time. Why heat an empty home for hours? Let our team help you put in place a solution for this need.

Is It Time to Call Our Team for Service?

At Gilmore Heating Air and Plumbing, we work closely with you to spot problems present at your home and to offer solutions. If you are like many homeowners, you just need fast, reliable service at a competitive price. For help with your heating system in Placerville, CA, call us today.