Skip to content

Causes of Uneven Heating in Your Home

Despite boosting the setting of your heater multiple times to keep the cold out of your home, you may still realize that your house is not getting warm enough. A range of issues might contribute to uneven heating in the home. So, what is the cause of uneven heating in your home, and how should you address it? Our Sacramento HVAC Experts explain below.

The Most Common Causes of Uneven Heating in Your Home

Have you observed that your house has no heat in one zone and some heat in another? Here are some of the most prevalent reasons for uneven heating in houses. If you’ve been searching for heating repair near me, you’ve come to the right place! 

Causes of Uneven Heating in House

The Boiler is Undersized

Your boiler might be smaller to accommodate your home’s radiators. This is a prevalent issue in newly built homes. House builders often install the precise boiler capacity required. Since installation, you may have expanded or modified the radiators to double panels from single panels in order to provide additional heat throughout your home. Our Sacramento heating company explains that if it is unable to manage it, uneven warmth in the home may ensue.

Your Radiators Have Become Filthy

Another main reason of no heat in one zone of the house is this. Your radiators may have been sledded. So how did you know? Check to see whether the radiators are just warming up from the top. This indicates that they are working at half-power.

Your Plumbing has Become Clogged or Restricted

Our Sacramento plumbers explain that pipework can impact your heating system. Pipework can be obstructed or restricted by sled. If the sludge gets into your manifolds or valves, the water flow to the radiators will be obstructed.

Your Thermostat is Broken

This is another typical reason of inconsistency in home heating. The thermostat may be opening and shutting sooner than usual and not detecting the proper temperature.

A heat pump that isn’t working. You may discover that your Heat Pump is not opening properly. It may only partially open or may not pump at the proper typical pace.  Our friends over at McQuillan Brothers, Twin Cities Heating Company, shares that this typically indicates that heat isn’t reaching your radiators, resulting in a chilly room.

What are the best answers to what causes uneven heating in the house?

If you’re not sure what’s causing the problem, there are several options you may attempt on your own. For example, when your furnace is turned on, test your radiators to determine if the entire system is hot. Set your settings to the maximum level as well, and check to see whether the radiators are too hot to touch. Of course, you can always contact our Sacramento heating repair company for heating replacement services. 

Contact Gilmore Today 

Never disregard any problems you notice with your heater, especially during Sacramento’s cold months. The factors discussed above will assist you in troubleshooting the issue and quickly addressing it to an HVAC professional prior to inspection. Do you require the assistance of an HVAC professional for heating in Sacramento? Schedule an appointment with Gilmore today. 

sacramento heating replacement

Request Service

How Can We Serve You?

We are so glad you’re here! Complete the form below to get in touch, claim your coupon, or simply join our email list.