Reasons Why Your Toilet Won’t Flush Sacramento

Today on the blog, our Sacramento plumbing company will explain some of the most common causes of toilet blockages. Remember that safety is paramount in any home improvement work. If you are unsure about a work, it is advisable to delegate it to a Sacramento plumbing contractor. 

The Handle

Flushing the toilet and nothing happens? This can actually be excellent news because it is usually one of the simplest problems to resolve. If you don’t hear or see any water move when you press the handle, it’s likely that your toilet handle is detached. It’s as simple as reconnecting a couple of basic pieces to fix it.

Our Sacramento plumbers explain that when there isn’t enough water in the tank, the toilet won’t flush because it can’t discharge enough water into the bowl. Examine the back of the toilet tank to see whether this is the source of the problem. The water level should be one inch below the top of your overflow tube. In many circumstances, this is rather simple to deal with.

Sometimes it’s as simple as turning the flush valve. However, in some circumstances, the fundamental reason of this could be low water pressure, pipe leaks, or other issues that necessitate the services of a plumber.

Valve Issue

Does your toilet flush properly but then refuses to stop running? This becomes a problem since it makes it difficult to flush the toilet again in the future. A running toilet is also a problem because it wastes a lot of water. The underlying cause of this is frequently a bent or damaged flapper seal. You may need to replace it, which is a relatively quick and simple fix. Another potential issue is hard water buildup inside your fill valve, which can prevent it from properly shutting off. After watching a few lessons, you should be able to flush the fill valve on your own, but if you’re new to DIY, you should get the assistance of a plumber just to be cautious.

Your Toilet Is Clogged

In many cases, the problem is actually a clog inside the toilet. Toilets are only built to manage specific waste types and volumes. They can easily become clogged with items such as sanitary goods, a toy your child dropped in the bowl, or a significant piece of toilet paper.

You are obviously aware if your toilet is clogged. If there’s something in the bowl that won’t go down, you’ve got a clog. Small clogs at the surface can be handled by oneself. You might be able to get things moving again by plunging it or poking it with a toilet brush. If the clog is really obstinate, you or your plumber may need to use a toilet auger to enter inside and unclog the toilet.

You Have a Drain Line Issue 

It is possible that everything in your toilet is working properly, but your toilet will not flush at all. This indicates that the issue is deeper within your plumbing. The drain lines that transport trash to your sewage or septic system might develop a variety of problems. If a clogged drain line is the reason for your toilet not flushing, you may discover drains not working throughout the house. Water may back up into your sinks, showers, and tubs, or they may all drain slowly.

Your drain line, like a toilet, can become clogged. A plumber with an extra-long auger may be required to come out and clean it. A cracked or leaking drain pipe might potentially prevent your toilet from flushing. Trees and other roots from your yard might also grow into the drain pipe, necessitating the replacement of the entire drain line portion.